 |
Delivering consistent, validated sterilization at 121°C, this dental steam sterilizer meets the strictest hygiene requirements for reusable medical and dental instruments. The 304 stainless steel sterilization chamber ensures uniform heat distribution across every cycle, eliminating 99.99% of harmful microorganisms and spores. For operators, this translates to zero cross-infection risks, full compliance with patient safety protocols, and reduced liability for healthcare facilities.
The 18L/23L medical autoclave features an innovative dual water tank design: an independent closed waste water tank to prevent cross-contamination, and an open-top fresh water tank for effortless filling and routine cleaning. Its plug-and-play drainage pipe design requires no complex installation, saving valuable floor space and reducing setup time for busy facilities. The electronic + mechanical dual door lock system adds an extra layer of safety, preventing accidental opening during active sterilization cycles and minimizing operational risks.
Equipped with an integrated thermal printer, this commercial sterilizer with built-in printer automatically generates and prints full sterilization cycle records, including temperature, duration, and pressure data. This full traceability is critical for healthcare facilities to meet global medical regulatory requirements, eliminating manual record-keeping errors and simplifying audit processes for operators in highly regulated markets.
Specification | YS-18L Model | YE-23L Model |
Power Supply | 220V/50Hz/2500W | 220V/50Hz/2500W |
Clean Water Tank Capacity | 4.5L | 4.5L |
Waste Water Tank Capacity | 4.0L | 4.0L |
Sterilization Chamber Size | ø250 x 350mm | ø250 x 450mm |
Net Chamber Capacity | 18L | 23L |
Overall Product Size (W x D x H) | 503 x 655 x 433mm | 503 x 655 x 433mm |
Net Weight | 53Kg | 55Kg |
Gross Weight | 63Kg | 65Kg |
Chamber Material | Stainless Steel 304 | Stainless Steel 304 |
Door Lock System | Electronic + Mechanical Dual Lock | Electronic + Mechanical Dual Lock |
Data Output | Integrated Thermal Printer | Integrated Thermal Printer |
The YESON Basic Series Sterilizers are fully compliant with European medical device standards, with every unit undergoing rigorous safety and performance testing before shipment. Key safety features include short circuit protection, over-temperature protection, and the dual-lock door system, ensuring full alignment with global healthcare safety regulations. We provide comprehensive regulatory documentation, including certification files, test reports, and multilingual user manuals, to support seamless market access for distributors across the EU, North America, Southeast Asia, and other global regions. All units come with a robust quality assurance framework, reducing after-sales support burdens for our distribution partners.
Dental Clinics & Orthodontic Practices: Optimized for sterilizing dental handpieces, extraction tools, orthodontic appliances, and restorative instruments, meeting the daily sterilization needs of both small and large dental practices.
General Hospitals & Ambulatory Surgical Centers: Suitable for sterilizing minor surgical instruments, endoscopic accessories, and reusable medical supplies in outpatient departments, emergency rooms, and ambulatory surgery facilities.
Clinical & Research Laboratories: Ideal for sterilizing labware, culture media, and biological sample containers in microbiology, pharmaceutical, and biotechnology laboratories.
Aesthetic & Medical Spa Clinics: Perfect for sterilizing reusable aesthetic tools, injection equipment, and skincare instruments to meet strict hygiene standards for medical aesthetic practices.
We offer end-to-end solutions tailored for global medical equipment distributors, bulk procurement partners, and healthcare group purchasers. Our partner benefits include competitive tiered bulk pricing, flexible minimum order quantities, full OEM/ODM customization (including private label branding, custom packaging, and language localization for user interfaces and manuals), and dedicated regional sales and technical support. We also provide global logistics coordination, customs clearance documentation, and on-site training services for bulk orders, helping our partners reduce operational costs, expand their product portfolios, and capture more market share in their local regions.
Yes, the entire series is fully compliant with European medical device regulations, with complete certification documentation available for distribution partners.
The two models share identical core performance, safety features, and overall dimensions, with the only difference being the sterilization chamber size and net capacity to accommodate different batch volumes.
Both models feature a high-grade 304 stainless steel sterilization chamber, designed for long-term durability, corrosion resistance, and consistent heat distribution.
Yes, every unit comes with a built-in thermal printer that automatically prints full cycle records, ensuring full traceability for regulatory compliance and audit purposes.
Delivering consistent, validated sterilization at 121°C, this dental steam sterilizer meets the strictest hygiene requirements for reusable medical and dental instruments. The 304 stainless steel sterilization chamber ensures uniform heat distribution across every cycle, eliminating 99.99% of harmful microorganisms and spores. For operators, this translates to zero cross-infection risks, full compliance with patient safety protocols, and reduced liability for healthcare facilities.
The 18L/23L medical autoclave features an innovative dual water tank design: an independent closed waste water tank to prevent cross-contamination, and an open-top fresh water tank for effortless filling and routine cleaning. Its plug-and-play drainage pipe design requires no complex installation, saving valuable floor space and reducing setup time for busy facilities. The electronic + mechanical dual door lock system adds an extra layer of safety, preventing accidental opening during active sterilization cycles and minimizing operational risks.
Equipped with an integrated thermal printer, this commercial sterilizer with built-in printer automatically generates and prints full sterilization cycle records, including temperature, duration, and pressure data. This full traceability is critical for healthcare facilities to meet global medical regulatory requirements, eliminating manual record-keeping errors and simplifying audit processes for operators in highly regulated markets.
Specification | YS-18L Model | YE-23L Model |
Power Supply | 220V/50Hz/2500W | 220V/50Hz/2500W |
Clean Water Tank Capacity | 4.5L | 4.5L |
Waste Water Tank Capacity | 4.0L | 4.0L |
Sterilization Chamber Size | ø250 x 350mm | ø250 x 450mm |
Net Chamber Capacity | 18L | 23L |
Overall Product Size (W x D x H) | 503 x 655 x 433mm | 503 x 655 x 433mm |
Net Weight | 53Kg | 55Kg |
Gross Weight | 63Kg | 65Kg |
Chamber Material | Stainless Steel 304 | Stainless Steel 304 |
Door Lock System | Electronic + Mechanical Dual Lock | Electronic + Mechanical Dual Lock |
Data Output | Integrated Thermal Printer | Integrated Thermal Printer |
The YESON Basic Series Sterilizers are fully compliant with European medical device standards, with every unit undergoing rigorous safety and performance testing before shipment. Key safety features include short circuit protection, over-temperature protection, and the dual-lock door system, ensuring full alignment with global healthcare safety regulations. We provide comprehensive regulatory documentation, including certification files, test reports, and multilingual user manuals, to support seamless market access for distributors across the EU, North America, Southeast Asia, and other global regions. All units come with a robust quality assurance framework, reducing after-sales support burdens for our distribution partners.
Dental Clinics & Orthodontic Practices: Optimized for sterilizing dental handpieces, extraction tools, orthodontic appliances, and restorative instruments, meeting the daily sterilization needs of both small and large dental practices.
General Hospitals & Ambulatory Surgical Centers: Suitable for sterilizing minor surgical instruments, endoscopic accessories, and reusable medical supplies in outpatient departments, emergency rooms, and ambulatory surgery facilities.
Clinical & Research Laboratories: Ideal for sterilizing labware, culture media, and biological sample containers in microbiology, pharmaceutical, and biotechnology laboratories.
Aesthetic & Medical Spa Clinics: Perfect for sterilizing reusable aesthetic tools, injection equipment, and skincare instruments to meet strict hygiene standards for medical aesthetic practices.
We offer end-to-end solutions tailored for global medical equipment distributors, bulk procurement partners, and healthcare group purchasers. Our partner benefits include competitive tiered bulk pricing, flexible minimum order quantities, full OEM/ODM customization (including private label branding, custom packaging, and language localization for user interfaces and manuals), and dedicated regional sales and technical support. We also provide global logistics coordination, customs clearance documentation, and on-site training services for bulk orders, helping our partners reduce operational costs, expand their product portfolios, and capture more market share in their local regions.
Yes, the entire series is fully compliant with European medical device regulations, with complete certification documentation available for distribution partners.
The two models share identical core performance, safety features, and overall dimensions, with the only difference being the sterilization chamber size and net capacity to accommodate different batch volumes.
Both models feature a high-grade 304 stainless steel sterilization chamber, designed for long-term durability, corrosion resistance, and consistent heat distribution.
Yes, every unit comes with a built-in thermal printer that automatically prints full cycle records, ensuring full traceability for regulatory compliance and audit purposes.
