 |
Trusted by over 40,000 installations across the EU since 2008, it delivers consistent, reliable, and regulatory-aligned sterilization solutions for clinical operators, medical device distributors, and bulk wholesale partners worldwide.
Unlike standard autoclaves that take 45+ minutes for a full cycle, our Pro-Series class b sterilizer completes a full 3-time vacuum sterilization and post-drying process in just 20 minutes (10min vacuum phase, 4min sterilization phase, 6min drying phase). For high-traffic clinics and commercial facilities, this translates to 60% faster instrument recycling, fewer backup instrument sets to purchase, higher patient/client turnover, and a measurable boost to your daily revenue capacity.
Engineered with a 3-time pre-vacuum phase and independent post-drying system, this dental autoclave delivers 100% sterilization efficacy for both wrapped and unwrapped instruments, while eliminating residual moisture to prevent instrument rusting and extend service life. Optional built-in water quality detection and sterilization effectiveness assessment add an extra layer of protection, helping your facility avoid cross-contamination risks and regulatory non-compliance penalties.
Proven by 16+ years of market validation and 40,000+ active installations in the EU, this commercial sterilizer is built to withstand heavy daily use. It features a food-grade 304 stainless steel sterilization chamber, separated clean and waste water tanks to avoid cross-contamination, and multi-layer safety protection, minimizing unplanned downtime and long-term maintenance expenses for your business.
Fully compliant with European medical device standards, our Pro-Series autoclave supports complete sterilization data recording and output via integrated thermal printer and USB port. This feature simplifies regulatory record-keeping for dental clinics, veterinary hospitals, and commercial facilities, ensuring full traceability of every sterilization cycle and seamless compliance with local health authority audits.
Specification | YESON Pro-Series 8L | YESON Pro-Series 12L |
Power Supply | 220V/50Hz/1500W | 220V/50Hz/1500W |
Clean Water Tank Capacity | 2.5L | 2.5L |
Waste Water Tank Capacity | 2.0L | 2.5L |
Sterilization Chamber Size | ø170×320mm | ø200×360mm |
Rated Capacity | 8L | 12L |
Overall Product Dimensions (W×D×H) | 436×629×355mm | 436×629×355mm |
Net Weight | 45kg | 48kg |
Gross Weight | 55kg | 58kg |
Required Installation Width | 600mm | 600mm |
Chamber Material | 304 Stainless Steel | 304 Stainless Steel |
Door Lock System | Electronic + Mechanical Dual Lock | Electronic + Mechanical Dual Lock |
Data Output | Thermal Printer + USB | Thermal Printer + USB |
Safety Protection | Short Circuit Protection, Overheat Protection | Short Circuit Protection, Overheat Protection |
As a medical device manufacturer with 16+ years of EU market experience, we prioritize full regulatory compliance to eliminate import and operational risks for our partners:
100% compliance with European Class B sterilizer standards, suitable for distribution and use across the EU and EEA markets
Rigorous pre-shipment factory testing for every unit, ensuring consistent performance that meets international medical device standards
Dual electronic + mechanical door lock system for maximum operator safety, with automatic pressure interlock to prevent accidental opening during operation
Separated clean and waste water tank design, simplifying daily maintenance and reducing cross-contamination risks
Optional water quality detection module to adapt to regional water conditions and extend the service life of the equipment
This class b dental autoclave is purpose-built for sterilizing dental handpieces, surgical instruments, and wrapped dental tools, meeting the strictest infection control requirements for dental practices. The fast cycle speed and full data traceability help dental clinics improve daily patient capacity, streamline compliance management, and reduce operational overhead.
Ideal for veterinary sterilization needs, our 8L/12L autoclave ensures complete sterilization of veterinary surgical instruments, wound care tools, and examination equipment. Its compact footprint fits most veterinary clinic workbenches, while the reliable performance helps pet hospitals reduce infection risks and ensure safe, high-quality care for animal patients.
As a commercial-grade sterilizer for beauty and wellness facilities, this autoclave effectively sterilizes beauty tools, tattoo equipment, pedicure instruments, and nail care tools. It helps your business meet local health and safety regulations, build customer trust, and avoid operational risks associated with improper instrument disinfection.
We offer tailored solutions for medical device distributors, wholesale buyers, healthcare group purchasers, and OEM/ODM partners worldwide:
Flexible bulk order pricing with tiered discounts for large-volume purchases, maximizing your profit margin
Full OEM/ODM support, including custom branding, packaging, parameter adjustments, and function customization to meet local market demands
Sample order support for qualified distributors to test product performance before bulk procurement
Dedicated one-on-one account managers, providing full technical support, regulatory documentation, and after-sales service throughout our partnership
Stable production capacity and global logistics support, with flexible shipping terms (FOB, CIF, EXW) to meet your import requirements
The lab-verified complete Class B sterilization cycle (including 3-time vacuum phase, sterilization phase, and post-drying phase) is only 20 minutes, which is 60% faster than most standard autoclaves on the market.
Yes, the YESON Pro-Series 8L/12L sterilizer is fully compliant with European Class B sterilizer standards, and has been installed in over 40,000 facilities across the EU since 2008.
The core difference is the sterilization chamber capacity and size: the 8L model has a ø170×320mm chamber, while the 12L model has a larger ø200×360mm chamber to accommodate more instruments per cycle. All core functions, safety features, and power specifications are identical between the two models.
Yes, both the 8L and 12L models are equipped with an integrated thermal printer and USB port, allowing full recording and export of sterilization cycle data for regulatory compliance and audit purposes.
Yes, we provide flexible bulk wholesale pricing, as well as full OEM/ODM customization services for medical device distributors and bulk buyers worldwide. Please contact our sales team for a customized quote based on your order volume and requirements.
Trusted by over 40,000 installations across the EU since 2008, it delivers consistent, reliable, and regulatory-aligned sterilization solutions for clinical operators, medical device distributors, and bulk wholesale partners worldwide.
Unlike standard autoclaves that take 45+ minutes for a full cycle, our Pro-Series class b sterilizer completes a full 3-time vacuum sterilization and post-drying process in just 20 minutes (10min vacuum phase, 4min sterilization phase, 6min drying phase). For high-traffic clinics and commercial facilities, this translates to 60% faster instrument recycling, fewer backup instrument sets to purchase, higher patient/client turnover, and a measurable boost to your daily revenue capacity.
Engineered with a 3-time pre-vacuum phase and independent post-drying system, this dental autoclave delivers 100% sterilization efficacy for both wrapped and unwrapped instruments, while eliminating residual moisture to prevent instrument rusting and extend service life. Optional built-in water quality detection and sterilization effectiveness assessment add an extra layer of protection, helping your facility avoid cross-contamination risks and regulatory non-compliance penalties.
Proven by 16+ years of market validation and 40,000+ active installations in the EU, this commercial sterilizer is built to withstand heavy daily use. It features a food-grade 304 stainless steel sterilization chamber, separated clean and waste water tanks to avoid cross-contamination, and multi-layer safety protection, minimizing unplanned downtime and long-term maintenance expenses for your business.
Fully compliant with European medical device standards, our Pro-Series autoclave supports complete sterilization data recording and output via integrated thermal printer and USB port. This feature simplifies regulatory record-keeping for dental clinics, veterinary hospitals, and commercial facilities, ensuring full traceability of every sterilization cycle and seamless compliance with local health authority audits.
Specification | YESON Pro-Series 8L | YESON Pro-Series 12L |
Power Supply | 220V/50Hz/1500W | 220V/50Hz/1500W |
Clean Water Tank Capacity | 2.5L | 2.5L |
Waste Water Tank Capacity | 2.0L | 2.5L |
Sterilization Chamber Size | ø170×320mm | ø200×360mm |
Rated Capacity | 8L | 12L |
Overall Product Dimensions (W×D×H) | 436×629×355mm | 436×629×355mm |
Net Weight | 45kg | 48kg |
Gross Weight | 55kg | 58kg |
Required Installation Width | 600mm | 600mm |
Chamber Material | 304 Stainless Steel | 304 Stainless Steel |
Door Lock System | Electronic + Mechanical Dual Lock | Electronic + Mechanical Dual Lock |
Data Output | Thermal Printer + USB | Thermal Printer + USB |
Safety Protection | Short Circuit Protection, Overheat Protection | Short Circuit Protection, Overheat Protection |
As a medical device manufacturer with 16+ years of EU market experience, we prioritize full regulatory compliance to eliminate import and operational risks for our partners:
100% compliance with European Class B sterilizer standards, suitable for distribution and use across the EU and EEA markets
Rigorous pre-shipment factory testing for every unit, ensuring consistent performance that meets international medical device standards
Dual electronic + mechanical door lock system for maximum operator safety, with automatic pressure interlock to prevent accidental opening during operation
Separated clean and waste water tank design, simplifying daily maintenance and reducing cross-contamination risks
Optional water quality detection module to adapt to regional water conditions and extend the service life of the equipment
This class b dental autoclave is purpose-built for sterilizing dental handpieces, surgical instruments, and wrapped dental tools, meeting the strictest infection control requirements for dental practices. The fast cycle speed and full data traceability help dental clinics improve daily patient capacity, streamline compliance management, and reduce operational overhead.
Ideal for veterinary sterilization needs, our 8L/12L autoclave ensures complete sterilization of veterinary surgical instruments, wound care tools, and examination equipment. Its compact footprint fits most veterinary clinic workbenches, while the reliable performance helps pet hospitals reduce infection risks and ensure safe, high-quality care for animal patients.
As a commercial-grade sterilizer for beauty and wellness facilities, this autoclave effectively sterilizes beauty tools, tattoo equipment, pedicure instruments, and nail care tools. It helps your business meet local health and safety regulations, build customer trust, and avoid operational risks associated with improper instrument disinfection.
We offer tailored solutions for medical device distributors, wholesale buyers, healthcare group purchasers, and OEM/ODM partners worldwide:
Flexible bulk order pricing with tiered discounts for large-volume purchases, maximizing your profit margin
Full OEM/ODM support, including custom branding, packaging, parameter adjustments, and function customization to meet local market demands
Sample order support for qualified distributors to test product performance before bulk procurement
Dedicated one-on-one account managers, providing full technical support, regulatory documentation, and after-sales service throughout our partnership
Stable production capacity and global logistics support, with flexible shipping terms (FOB, CIF, EXW) to meet your import requirements
The lab-verified complete Class B sterilization cycle (including 3-time vacuum phase, sterilization phase, and post-drying phase) is only 20 minutes, which is 60% faster than most standard autoclaves on the market.
Yes, the YESON Pro-Series 8L/12L sterilizer is fully compliant with European Class B sterilizer standards, and has been installed in over 40,000 facilities across the EU since 2008.
The core difference is the sterilization chamber capacity and size: the 8L model has a ø170×320mm chamber, while the 12L model has a larger ø200×360mm chamber to accommodate more instruments per cycle. All core functions, safety features, and power specifications are identical between the two models.
Yes, both the 8L and 12L models are equipped with an integrated thermal printer and USB port, allowing full recording and export of sterilization cycle data for regulatory compliance and audit purposes.
Yes, we provide flexible bulk wholesale pricing, as well as full OEM/ODM customization services for medical device distributors and bulk buyers worldwide. Please contact our sales team for a customized quote based on your order volume and requirements.
